Inverted oil bath with
5.5" of fully adjustable travel.
Hydraulic disk brake system with fully adjustable brake lever.
12" complete front wheel that is laced and has tube and tire installed!
Fork guards.
Easy to install
Bars not included.
*can be ordered with a 10" front wheel also
This fork set up also includes Magura Gustav master cylinder, Gustav caliper, caliper carrier, hydralic brake line, rotor and SiK50 Billet Hub.
Custom designed billet aluminum upper & lower
triple clamps
Now includes stiff fork springs
Fork tubes (4" longer than stock)
Billet aluminum 2 1/4 handlebar risers and bolts
Fork stem
Forks
Front axle
Front brake cable & guides
Brake cable clip
Mini MX bars
Note - requires larger throttle assembly sold separately
Heat-treated chromoly steel frame
TIG welded
Fully gusseted
Thicker-walled main tube that is also larger in diameter
Conservatively estimated at 4 times stronger than the stock unit
Race legal open cradle configuration, but with fully closed loop rear
sub frame under the seat for added strength and safety
Stronger swing arm pivot area prevents wallowing
Frame is 1" longer than stock, resulting in greatly enhanced handling
characteristics
Extended frame also provides:
Much needed knee-to-bar clearance
Improved rider position
Better Center of Gravity
Better control
Raw $350.00
This Chromoly 1" longer frame with chromoly detachable subframe is the off the hook! It features a detachable chromoly subframe with all hardware as well as a 1" rise in gas tank and seat height for more more leg room and to allow bigger carburetor modifications.
Lahaye Swinger is state of the art technology,
made out of 100% chromoly. The swingarm is 3 in. longer and 1lb. lighter
than stock. It's also guaranteed to be the strongest swingarm on the XR/CRF50
market. Resembling a full size motocross bike, not like the traditional
XR50 swing arm that many manufacturers copy. The axle bolt is fitted
through aluminum block adjusters to make smooth wheel and chain
adjustments. The swing arm bolt rides in two bearings for the smoothest
possible operation. The swing arm is also fitted with a lower chain
guide bracket. Instead of using a rubber chain buffer we use a nylon for
longer life. Along with upper and lower clear polyurethane chain rollers
with sealed bearings and additional seals to keep water and dirt out.
NO WELDING NEEDED This kit bolts to your stock or after market frame.
This swing arm will allow you to ride longer and hit obstacles faster
then you could imagine. Let us know the weight and ability so that we
can set up the iShock for your needs. You cant buy a better swing arm
package for the XR/CRF50 that rides this well. The Lahaye swingarm
travels 9" with squeezed bump.
SiK50 Custom anodized aluminum swingarm (2.25" -
3 longer than stock)
Billet spacers
Precision pivot bearings
Colors- Black, Silver, Blue, Red
Chromoly steel powder coated black swingarm (2
longer than stock)
Reverse chain adjusters
Extended brake rod
Chain roller & spacer
with roller bearing pivots. A full 2 1/2 inches longer than your stock unit, gives you that soft ride while increasing your rear end travel as well as saving you money.
Kit includes:
Sik50s Custom aluminum swingarm (2.25" - 3 longer than stock)
Billet spacers
Precision pivot bearings
iShock with Reservoir
Chain Roller
Extended rear brake rod
RK Chain
Lahaye exclusive! These new bar mounts for your Marzocchi Shiver forks lift the bars higher and slightly forward for a more comfortable feel!
Uses your stock top dogbone and bolts.
Click here to see a picture installed on forks.
Oil dampened, 27mm,
convention style forks
Gold or silver anodized, CNC machined,
aluminum top triple clamp
Gold or silver anodized, CNC machined, aluminum
lower clamp and stem
Heavy-duty fork springs
Black powder coated fork legs
Updated damping rods and bottoming cones
Includes the full BBR handlebar kit
5 of travel
(withbar kit)
$519.95 (with out bar kit)
Features:
|
Features:
|
